How to Control Coding Agents From Your Phone With Tracer
Set up a Tracer remote host and the Android or iOS app to start tasks, answer agent questions, approve permissions and review diffs from your phone.
For Engineering and Operations

How do you control coding agents from your phone with Tracer?
You register one of your own machines (a laptop, desktop, dev box or VM) as a remote host in Tracer, then sign in to the Tracer mobile app on Android or iOS with the same account. The agents keep running on the host. Your phone is a window into it. From there you can start tasks, answer agent questions, approve permissions, send follow-up instructions, and review files, diffs and terminals without sitting at your desk.
TL;DR
- Tracer is a free, open-source desktop app for macOS, Linux and Windows that runs coding agents such as Claude Code, Codex, OpenCode and Cursor side by side, using the subscriptions you already have.
- The phone app only works against a remote host you register first. The code, agents, terminals, browser sessions and credentials stay on that host, and nothing is copied to the phone.
- From the phone you can start a task, attach an image, answer questions and approve permissions, so the agent doesn't stall while you're away.
- Notifications tell you when an agent needs you or finishes, and tapping one opens that exact task.
- Panels open full screen, and the terminal gets an on-screen key bar with Escape, Tab, Control and arrow keys.
- The limits are real: the phone can't be a host, can't restart a host, and voice dictation isn't available yet.
What is Tracer, and why does a phone app matter?
Tracer gives your coding agents one shared workspace. Instead of juggling separate chat windows, you work inside a task. A task holds its files, artifacts, history and working context, plus panels for chats, git diffs, pull requests, terminals and browsers. Agents can ask each other questions or hand work along, and you can switch models mid-chat without losing the thread.
The phone app matters because agent work is slow and stop-start. An agent runs for a while, then needs a decision: a clarifying question, a permission to run something, a direction change. If you're away from your desk, the work sits idle until you're back. The mobile app is meant to close that gap, so a two-minute answer from your phone keeps an hour of work moving.
What do you need before you start?
- A computer that will stay on. This is your host. Since the agents run there, a machine that goes to sleep will stop them. Check your power settings (this is general advice, not a Tracer requirement).
- Tracer installed on that computer. It runs on macOS, Linux and Windows.
- Your own agent subscriptions. Tracer doesn't sell you another plan. You bring the ones you have for Claude Code, Codex, OpenCode, Cursor and others.
- A Tracer account. Access to your hosts and devices is tied to it.
- The Tracer app on your phone. It's available for Android (Play Store) and iOS (App Store).
How do you set up a Tracer remote host?
The idea is simple: register the host first, then connect from another device.
- Install Tracer on the machine that will do the work and open the repo and tasks you want to run there. That machine holds the repo, the running agents, the terminals, the browser sessions and your credentials.
- Register that machine as a remote host from your Tracer account. The exact menu labels may differ by version, so follow the in-app prompts.
- Install the mobile app and sign in with the same account.
- Pick up the same workspace. Your tasks, chats, artifacts, terminals and browsers appear where you left them.
You can also use the same host from a second desktop, not just a phone. And you can manage your registered hosts and devices in your account and remove any you no longer use. If you lose a phone, remove it from there.
What can you actually do from the phone?
The mobile app is not a read-only dashboard. In the walkthrough that prompted this guide, the creator did the following from the phone:
- Start a new task by typing what you want. You can attach an image if a picture explains it better than words.
- Answer an agent's question inline when it needs clarification.
- Approve a permission request so the agent can continue.
- Send a follow-up instruction to change direction, the same way you would on the desktop.
Notifications tie this together. Your phone alerts you when an agent needs input or when it finishes. Tapping the alert opens that task directly, so you don't have to hunt for it.
How do panels, terminals and the browser work on a small screen?
On the phone, panels open full screen and you switch between them. That gives you a practical review loop:
- Files and artifacts: check what the agent produced.
- Git diffs and pull requests: read what changed before you say yes to anything.
- Terminals: open a terminal on the host. A phone keyboard lacks Escape, Tab, Control and arrow keys, so Tracer adds an on-screen key bar with them. That makes the terminal usable for things like interrupting a process or moving through shell history.
- Browser: the host streams its browser to your phone, so you can see the page the agent is working on. The browser runs on the host, not on your phone.
A caveat on the browser: when it streams from a remote host to another desktop, you get navigation and the address bar but not the local-only tools (dev tools, viewport presets and annotation). The source doesn't say exactly how that applies to the phone, so don't count on those tools being there.
What are the limits of Tracer on mobile?
Know these before you rely on it.
| Limit | What it means for you |
|---|---|
| You need an active remote host | If the host machine is off, asleep or offline, the agents aren't running and the phone has nothing to control. |
| The phone can't be a host | Agents never run on the phone itself. |
| The phone can't restart a host | If the host goes down, you need to get to it (or someone near it) to bring it back. |
| No voice dictation yet | You type your instructions. Long prompts are slower on a phone keyboard. |
Plan around the second and third limits. Before you leave, confirm the host is awake and the agents are running. If a long task matters, don't assume you can fix a crashed host from a train.
Is it safe to run this from your phone?
Tracer's design keeps the sensitive parts in one place. The repo, running agents, terminals, browser sessions and credentials stay on the host, and nothing gets copied to your phone. Access is tied to your Tracer account, and you can remove a registered device when you lose it or stop using it.
Some sensible habits follow from that. Lock your phone. Remove old devices from your account. Read the diff and the permission request before you approve, because approving from a phone makes it easy to tap through without looking. A permission prompt exists so a person decides, so actually decide.
Can model routing help when you're away from your desk?
Yes, with some setup. Model routing is a separate Tracer feature that keeps a chat going when a provider hits a rate limit or goes down. You build a fallback plan under settings, in the order you choose. It can try another account on the same provider, switch to an equivalent model on another provider, or wait for your usage limit to reset. If nothing works, it notifies you.
The details matter if you're away from the keyboard:
- Automatic routing is off by default. Turn it on before you leave.
- It applies to chat agents on the selected host, not terminal agents.
- A switch starts a new agent session that uses the chat history, so the new model has the context.
- The wait option only works if the provider gives a reset time that falls within the maximum wait you set.
- You can cancel a pending switch, and decide whether the chat returns to the original provider later.
What is Tracer building next?
Tracer says it is working toward long-running automations: agents that handle ongoing work and come back to you only when your input matters. The stated vision includes monitoring tools such as Sentry, PostHog and Datadog, cloud execution so work isn't tied to an open laptop, and team sharing with access controls. This isn't released. There's a waitlist, and for now it's a plan, not a feature you can use.
Who does this change things for, and what can you do about it?
Solo developers and freelancers gain the most. If you run agents on a home or office machine, a phone can unblock them during a commute or errand. Start with one low-risk task and see how often the agent really needs you.
Managers and non-engineers who supervise agent work can review diffs, read artifacts and answer questions without needing a full setup in front of them. Ask your engineers which host they use and whether you can be added to a shared workspace (Tracer supports multiplayer workspaces for teammates).
Anyone worried about security should check with their IT team before registering a work machine as a host, since it holds credentials and repos.
Can you build your own tracker for agent work?
If you're running several agents across tasks, a simple internal page that tracks what's waiting on whom can help. Remy, a product agent that builds and deploys full-stack business apps from a plain-English description, could produce something like a task request form and status board: teammates submit requests, you see which are queued, running or awaiting approval, and everything lives in one login-protected web app. It builds mobile-responsive web apps, so it works in a phone browser, though not as a native app. It wouldn't replace Tracer's controls over the agents. It would organize the requests around them.
Frequently Asked Questions
Does Tracer run the coding agents on my phone?
No. The agents run on your remote host, which holds the repo, terminals, browser sessions and credentials. Your phone is a window into that host. The phone also can't act as a host or restart one.
Do I need to buy another subscription to use Tracer's agents?
Tracer itself is free and open source, and you bring your own subscriptions for agents like Claude Code, Codex, OpenCode and Cursor. The source doesn't mention any extra Tracer plan for using them. Check the app's own pricing information before assuming nothing else applies.
Can I dictate instructions by voice on the mobile app?
Not yet. Voice dictation isn't available in the mobile app, so you type your prompts. Attaching an image is supported, which can shorten what you need to write.
What happens if I lose my phone?
Access is tied to your Tracer account, and you can manage your registered hosts and devices there. Remove the lost device from your account so it can no longer reach your workspace.
Useful for
How we source, write, and correct our articles. Editorial standards
Related articles

CLI-Anything: What It Is and How to Use It With AI Agents

How to Set Up AI Model Fallbacks With OpenRouter

What Is Goal Engineering? LangChain's Idea Explained
